SACKit Touch 400 - Product Functionality; Device Controls; Hybrid ANC and Connectivity

5
PRODUCT FUNCTIONALITY
Here follows a description of all the product functions. Please use the ’Product overview’ on the previous
page to locate each button and area on the SACKit Touch 400 (page 4).
Over-ear design
• SACKit Touch 400’s design ensure both comfort and sound quality by direcng sound at you and
encapsulates the whole sound without being uncomfortable to wear for a longer me.
Volume down
• Press this buon to decrease the volume.
Volume up
• Press this buon to increase the volume.
Power on/off
• Master funcon buon. (X-buon)
• Used to power SACKit Touch 400 on and o.
• Plays and pause music when the headset is in Bluetooth mode.
• Accepts and rejects incoming calls.
Power indicator
• Indicates when SACKit Touch 400 is turned on and o.
• Flashes when SACKit Touch 400 is in Bluetooth pairing mode.
Hybrid-ANC
• Press the Acve Noise Cancellaon buon to acvate ANC.
• With ANC acvated you can minimize background noise to further enjoy your music.
• Toggle on the buon to acvate talk-through mode while wearing your SACKit Touch 400.
Charging port
• Use this port to charge SACKit Touch 400 with the included USB-C charging cable.
LED indicator
•Turns on when SACKit Touch 400 is charging.
3.5 mm. AUX
• 3.5 mm AUX jack connecon to connect the headset to a device without Bluetooth.
• In-line use is also possible when the headset is turned o.