SACKit Touch 400 - The Device; Bluetooth Operation; In-line Use; Battery Information

6
How to use Bluetooth
1. Long press the power on/o buon for 10 sec. Aer the rst 5 sec., you will hear the ”ON” sound.
Keep pressing the buon for another 5 sec. to turn on pairing mode, indicated by ashing the
power indicator red and blue.
2. Go to the Bluetooth sengs on your device and make sure Bluetooth is turned on.
3. Look for “SACKit Touch 400” in the list of bluetooth devices.
4. When it appears, tap the name to pair. The speaker emmits a conrmaon voice saying: ”Connec-
ted” as soon as it is paired.
5. Your device is now connected to SACKit Touch 400 and you can enjoy your music.
6. The music can be paused / played by pressing the Power buon.
7. SACKit 400 will automacally pair with the last connected device.
To connect to a new device make sure that the previous connected device is disconnected otherwise
connecng opportunies won’t appear on the new device.
THE DEVICE
Operaon instrucons for use aer rst pairing.
1. Aer rst pairing your SACKit Touch 400 and your bluetooth device will be conncted automacally
2. Bluetooth device will automacally reconnect, the LED light will blink blue once SACKit Touch 400
is succesfully paired.
3. Turn the headphones on by holding down the ”X buon” unl you hea the ”ON” sound.
4. Long press ”on/o” to turn o SACKit Touch 400.
How to use the Acve Noise Cancellaon funcon
1. Push the ANC buon on the le ear cup turning on the green LED light and you can enjoy the
headphones in Acve Noise Cancellaon mode
2. When you don’t need the Acve Noise Cancellaon funcon, turn the ANC funcon of by pus-
hing the ANC buon.
3. Acve Noice Cancellaon can be acvated and deacvated even when the SACKit Touch 300
Headphone is turned o. The Acve Noise Cancellaon will also remain on even when you turn
the SACKTouch 300 Headphone o.
Operaon instrucons for in-line use
Use the 3.5mm audio cable when you do not wish to use Bluetooth connecon. In-line use is also pos-
sible
when the headset is turned o.
For in-line use:
Use the 3.5mm audio cable when you do not wish to use Bluetooth connecon. In-line use is also pos-
sible when the headset is turned o.
Battery information
• Baery: rechargeable Polymer Lithium-Ion Baery, 500 mAh.
• Power: 5V DC 1A via USB-C. Please use the USB cable sealed with our headphone for charging
• Charging Time: Please be sure the baery has been fully charged before rst use. It can take up to
3 hours of charging the rst me, but 2 hours normally with a 5V 1A adapter.
• NOTE: If the pairing is not succesfull, please turn the headphones oof and back on and retry pairing.