SACKit Touch 400 - Cleaning and Specifications; Technical Specifications

8
TECHNICAL SPECIFICATIONS
• Model: SACKit Touch 400 Bluetooth and hybrid- ANC headphones
• Bluetooth version: V5.0
• Operang distance: 10M
• Bluetooth Mulpoint
• Charging me: 2.5 hours
• Charging current: 350mA
• Music playing me: 13 hours (bluetooth on, ANC on) 18 hours (Bluetooth on, ANC o)
• Call me: 25 hours
• ANC soluon: AMS
• Noise reducon performance: up to 27-30dB
• Frequency Range: 20Hz-20KHz
• Impedence:ANC_OFF:80Ω ANC_ON :110Ω
SACKit ApS declares that the radio equipment type SACKit Go 400 is in compliance with Direcve
2014/53/EU. The full text of the EU declaraon of conformity is available at the following internet
address: hp://SACKit.eu/support.
CLEANING OF THE PRODUCT
1. Kindly switch o SACKit Touch 300 before you clean your headset and remove it from the power-
supply
2. Do not use any strong chemicals to clean the product as this may damage the surface or fabric.
3. Please use a damp coon- or microber cleaning cloth instead.
4. During cleaning please be aware to avoid water in the USB port or other openings. Large amounts
of water and uids may damage the SACKit Touch 400.
5. Use a so, dry, and lint-free cloth to gently clean the speaker fabric.
• NOTE: Avoid using sharp objects to clean SACKit Touch 300