out in a professional manner is declined.
Fire safety
In the event of fire use carbon dioxide extinguishers
(CO
2
). Do not use water or dry-powder extinguishers.
4 INSTALLATION
For your own safety and that of other people
please strictly follow the “Safety regulations” at
chap. 3.
4.1 Packaging
The original packaging has been designed to protect
the machine during transport.
It is recommended to keep the packaging for future
transport.
4.2 Installation instructions
Before installing the machine, observe the following
safety precautions:
• place the machine in a safe place;
• make sure children cannot play with the machine;
• avoid placing the machine on very hot surfaces or
near naked flames.
The coffee machine is now ready to be connected to
the power supply.
4.3 Connecting to the electricity supply
Electric current can be dangerous! It is
therefore essential to follow the safety
regulations carefully.
Never use faulty cables! Faulty cables and
plugs must be replaced immediately by
Authorized Customer Service Centres.
The voltage of the appliance has been set by the
manufacturer.
Check that the voltage supplied matches the
indications on the label on the bottom of the
appliance.
• Check that the main switch (2) is not pressed
before connecting the machine to the power
supply.
• Connect the plug to a socket with suitable voltage.
4.4 Filling the water tank
• (Fig.1) - Remove the water tank (1), an automatic
Key to machine components (Pag.3)
1 Water tank
2 Main switch
3 Machine-on LED
4 Coffee button
5 Machine ready LED
6 Steam button
7 Hot water / steam dispenser knob
8 Coffee brew unit
9 Steam nozzle (Pannarello)
10 Power cord
11 Drip tray + grille
12 Cup warming plate
13 “Crema” filter holder
14 Filter for “Crema” filter holder
(one only for brewing 1 or 2 coffees)
15 Coffee measuring scoop
16 Pods filter
17 Pods adapter
18 Cappuccinatore
To Next Page
Loading...
