If the descaling cycle is interrupted, the water tank
and internal machine circuits must be rinsed.
After descaling the machine, reload the machine
circuit.
Remove the container.
When there is no more water
in the tank, close the knob.
Rinse and ll the tank again
with fresh drinking water.
Select the function “Ground
coffee”. DO NOT add the
ground coffee.
Place a coffee cup under the
dispensing spout.
Press the “long coffee” but-
ton. The machine starts
brewing the coffee.
Repeat the operations from
steps 17 to 20 ve times.
Then, proceed with step 22.
At the end of the process,
empty the cup.
Dispense all the water in the
tank. Once nished, close
the knob.
Place a large container un-
der the steam wand.
Open the knob to start dis-
pensing water.
Fill the water tank with fresh
drinking water.
When the indicator lights
are steady on, the machine
is ready for use.
Wash the components as described in chapter
“CLEANING AND MAINTENANCE”.
Check that the indicator lights
turn on and remain still.
Steadily lit
Steadily lit
Steadily lit
To Next Page
Loading...
