INSTALLATION / VENTILATE
Fill the coffee bean container
with coffee beans.
Fill the tank with fresh drin-
king water.
Move the ON/OFF switch to
“I” to turn on the machine.
Insert the plug into a sui-
table electric socket.
See rating plate
Place
a container beneath
the steam tube.
Note: You must load the circuit before starting up the
machine for the fi rst time, if it has been inoperative for a
lengthy period or if the water tank has been completely
emptied. Moreover, the circuit must be loaded every
time the message “VENTILATE” is displayed.
Turn the knob countercloc-
kwise to start loading the
circuit.
W
ait until a steady stream
of water fl ows out from the
nozzle.
Turn the knob clockwise
to terminate the circuit-
loading process.
The
machine is ready for
use.
Remove the container
.
The “Aqua Prima” fi lter can
be installed (see pg.31).
The messages displayed by the machine during operation are shown
on page 40.
Important
warning for using the “Aqua Prima Filter” can be found at
page 40.
To Next Page
Loading...
