Why is my Saeco INCANTO EXECUTIVE HD9712 Coffee Maker not turning on?
Your Saeco Coffee Maker might not be turning on because it's not properly connected to the electrical network. Ensure the machine is plugged in. Also, check that the power button is set to the "I" position and not "0".
Why is there no hot water dispensed from my Saeco INCANTO EXECUTIVE HD9712 Coffee Maker?
If no hot water is dispensed from your Saeco Coffee Maker, the steam/hot water dispensing spout may be clogged or dirty. Clean the steam/hot water wand and inspect the spout for any blockages. If there's limescale, try making a hole in it using a pin or needle.
Why is coffee leaking out of the dispensing spout on my Saeco INCANTO EXECUTIVE HD9712 Coffee Maker?
If coffee is leaking out of the dispensing spout on your Saeco Coffee Maker, it is likely that the dispensing spout is clogged. You should clean the dispensing spout and its holes.
What to do if my Saeco INCANTO EXECUTIVE HD9712 is brewing coffee too slowly?
If your Saeco Coffee Maker is brewing coffee slowly, it could be due to a few reasons. The coffee grind might be too fine, so you may need to change the coffee blend or adjust the grinder. Another possibility is that the circuits are clogged, in which case you should perform a descaling cycle. Also, the brew group could be dirty and require cleaning.
What to do if my Saeco Coffee Maker coffee is not hot enough?
If your coffee from the Saeco Coffee Maker isn't hot enough, try preheating your cups or mugs with hot water, or use the hot water dispensing spout to warm them. Also, check the beverage temperature setting in the programming menu and ensure it's set to 'Normal' or 'High'. If you add milk, preheat it before adding it to your coffee.
Why is there too much ground coffee under the brew group of my Saeco Coffee Maker?
If there's too much ground coffee under or over the brew group in your Saeco Coffee Maker, the coffee used might not be suitable for automatic machines. It may be necessary to change the type of coffee or the coffee grinder settings. The machine might also be adjusting the coffee grinder for a new kind of coffee beans. In this case, the machine automatically adjusts itself after brewing several cups of coffee.
Why are the coffee grounds from my Saeco Coffee Maker too humid?
Adjusting the ceramic coffee grinder affects the quality of residues. If the residues are too humid, set a coarser grind. If the residues are too dry, set a finer grind.
Why does the drip tray of my Saeco Coffee Maker get filled even when no water is drained?
This is a normal behaviour of the Saeco Coffee Maker.
What to do if my Saeco INCANTO EXECUTIVE HD9712 is grinding beans but no coffee is brewed?
If your Saeco Coffee Maker is grinding beans but no coffee is brewing, first ensure that the water tank is filled, and prime the circuit. Also, the brew group or the dispensing spout might be dirty and require cleaning. This issue can also occur when the machine is automatically adjusting the dose.
What to do if Saeco INCANTO EXECUTIVE HD9712 coffee is too weak?
If the coffee from your Saeco Coffee Maker is too weak, it could be because the machine is automatically adjusting the dose. Another reason might be that the ground coffee is too coarse. In this case, you should change the coffee blend or adjust the grinding.
General| Product Type | Coffee Maker |
|---|---|
| Color | Silver |
| Voltage | 230 V |
| Coffee Bean Container Capacity | 300 g |
| Bean Hopper Capacity | 300 g |
| Pump Pressure | 15 bar |
| Weight | 14.5 kg |
| Milk Frother | Yes |
| Display | LCD |
| Programmable | Yes |
| Removable Brew Group | Yes |
| Adjustable Coffee Strength | Yes |
| Adjustable Coffee Temperature | Yes |
| Adjustable Coffee Volume | Yes |
| Pre-Brew Aroma System | Yes |
| Automatic Rinsing and Cleaning | Yes |
| Energy Saving Mode | Yes |
| Cup Warmer | Yes |
| Drip Tray | Yes |
| Type | Espresso Machine |
| Dimensions (W x D x H) | 28 x 43 x 34 cm |
| Dimensions | 28 x 43 x 34 cm |
Essential safety precautions for using electrical appliances, including handling and supervision.
Advises on machine usage, cleaning, and safe handling of power supply cords.
Identifies and describes all parts of the coffee machine.
Guidance on packaging, unpacking, and initial machine placement.
Instructions for filling the water tank and coffee bean hopper.
Steps for plugging in, turning on, warm-up, and language selection.
Describes automatic/manual rinse cycles and water hardness testing.
Instructions for installing the water filter to improve water quality.
Adjusting grinder, crema, aroma, length, and spout height.
Guides for brewing coffee using whole beans or pre-ground coffee.
Filling, inserting, removing, and emptying the milk carafe for drinks.
Step-by-step instructions for preparing cappuccino, latte macchiato, and hot milk.
Procedures for dispensing steam and hot water using the steam wand.
Programming specific settings like prebrewing, temperature, and volume for beverages.
Configuring general settings, display, calendar, water, and power-on timers.
Daily tasks for cleaning the machine, water tank, and milk carafe.
Procedures for weekly cleaning of machine parts and monthly maintenance.
Comprehensive guide for performing the descaling cycle and rinsing.
Steps to take if the descaling process is interrupted accidentally.
Explains common display messages, error codes, and troubleshooting.
Identifies common problems and provides solutions for brewing and operational issues.
Information on energy saving, specs, warranty, service, and maintenance products.
To Next Page
