8
English
Brewing milk-based drinks
To brew milk-based drinks, you need to follow a few simple steps.
1 Fill the water tank with tap water and fill the bean hopper with beans.
Tip: When the flexible milk tube is connected to the cappuccinatore, slide the dispensing spout to the
uppermost position for easy access to the water tank.
2 Unscrew the lid of the milk container and fill the milk container with milk.
Always use milk coming directly from the fridge for optimal results.
3 Connect the flexible milk tube to the cappuccinatore.
4 Place the metal milk tube in the container.
5 Tap the Drinks icon, scroll and select the milk-based drink icon of your choice.
6 You can adjust the settings to your preference by swiping the adjustable bars up and down.
7 Press the start/stop icon at any time to start brewing the selected drink.
-
For specific drinks, the machine first dispenses milk and then coffee. For a number of other drinks this
is the other way around, the machine will first dispense coffee and then milk.
-
To stop dispensing milk before the machine has dispensed the preset amount, press the start/stop
icon (SM8780, SM8782, SM8785 only) or press the stop icon (SM8885, SM8889 only).
-
To stop dispensing the complete drink (milk and coffee) before the machine is finished, press and
hold the start/stop icon (SM8780, SM8782, SM8785 only) or press the stop icon (SM8885, SM8889
only).
Directly after dispensing the milk, the 'HygieSteam Shot' is performed. The machine shoots steam
through the internal milk system to rinse it quickly.The metal part of the milk tube may become hot. To
avoid the risk of burns, let it cool down first.
Tip: You can also use a regular milk carton to brew your milk-based drinks. Place the metal milk tube directly
into the milk carton.
To Next Page
Loading...
Need help?
General
