Setting Up the Machine
FFiillll WWaatteerr TTaannkk
··
Remove water tank (Fig. 1) and install Intenza water filter using the provided directions.
··
Fill water tank with fresh water and replace back in machine.
FFiillll BBeeaann HHooppppeerr
··
Open bean hopper lid and fill with whole espresso beans*. (Fig. 2)
··
Replace bean hopper lid.
AAttttaacchh PPoowweerr CCoorrdd
··
Attach power cord to machine and plug the other end into an outlet.
PPrriimmee WWaatteerr CCiirrccuuiitt
··
Place container under the dispensing head.
··
Press ON/OFF button to turn machine on. (Fig. 3)
··
The machine will automatically perform a rinsing cycle. A small quantity of water
will be dispensed.
·
·
The cycle will be completed automatically.
BBrreeww EEsspprreessssoo
··
Your machine is now ready to brew fresh, delicious espresso.
··
Place a cup under dispensing head and press a brew button. (Fig. 4)
* Please note, this machine has been inspected and tested. For this reason,
you may find a slight amount of grounds in your machine.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Contact Us
For more detailed instructions on how to operate the espresso machine, please refer to the user manual. If further
assistance is needed, please contact Saeco Customer Service:
SSaaeeccoo UUSSAA
call: 1-800-933-7876
email: supportsaecousa@philips.com
visit: www.saeco-usa.com
SSaaeeccoo CCaannaaddaa
call: 1-514-385-5551
email: info@saeco.ca
visit: www.saeco.ca
TToo OOrrddeerr PPaarrttss aanndd AAcccceessssoorriieess
visit: www.saecooutlet.com
To Previous Page
Loading...
