To Next PageTo Next PageWhat to do if Saeco Talea Ring plus says empty dreg drawer?
If your Saeco Coffee Maker displays a message to empty the dreg drawer, remove it and empty the contents. Ensure you do this while the appliance is switched on, and leave the drawer out for at least 5 seconds. Note that emptying the drawer when the appliance is off will not reset the message.
How to fix Saeco Coffee Maker by turning it off and on?
To resolve the fault, turn your Saeco Coffee Maker off, wait 30 seconds, and then turn it back on.
How to turn on Saeco Talea Ring plus Coffee Maker from standby?
To exit standby mode, press the 'ON' key on your Saeco Coffee Maker.
What to do if Saeco Talea Ring plus says to close coffee bean hopper lid?
The coffee bean hopper lid must be closed on your Saeco Coffee Maker to produce beverages. Ensure that it is properly closed.
Why does my Saeco Talea Ring plus say to insert ground coffee?
This message appears if the use of ground coffee was selected when the products were specifically programmed in your Saeco Coffee Maker.
When to replace Aqua Prima filter in Saeco Coffee Maker?
This message is only displayed if the filter control is enabled. The filter should be replaced in the following cases: 1) Over 60 litres of water have been dispensed for drinks 2) 90 days have elapsed since installation 3) 20 days have elapsed since the coffee maker was last used.
What to do if descaling cycle did not run correctly on Saeco Coffee Maker?
Repeat the descaling operation as described in the instruction booklet for your Saeco Coffee Maker.
What to do if cleaning cycle did not run correctly on Saeco Talea Ring plus?
Repeat the cleaning operation as described in the instruction booklet for your Saeco Coffee Maker.
General| Pump Pressure | 15 bar |
|---|---|
| Power | 1400 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Type | Automatic Espresso Machine |
| Water Tank Capacity | 1.7 liters |
| Bean Hopper Capacity | 250 grams |
| Milk Frother | Pannarello |
| Color | Black |
Follow basic safety precautions to reduce risk of fire, electric shock, and injury.
Read cautions regarding water, cleaning, and hot parts for safe operation.
Instructions for safe use and selection of extension cords for the power supply.
Information on the machine's suitability for domestic use and specific conditions of non-liability.
Conditions under which the manufacturer assumes no liability for damage to the appliance.
Guidance on keeping and making operating instructions available to users.
Labeled diagram identifying key parts of the coffee machine.
List and images of accessories provided with the appliance.
Step-by-step guide for installing the coffee machine and its components.
Instructions on how to power on and prepare the machine for initial use.
Step-by-step guide to navigate menus and select the desired display language.
Steps for inserting the water filter into the tank.
Instructions for initializing the water filter after installation.
Identification of buttons and indicators on the control panel.
Explanation of how Opti-Dose indicates and selects ground coffee quantity.
How to adjust the intensity of brewed coffee using the SBS system.
Procedure for adjusting the drip tray height for different cup sizes.
Instructions for adjusting the coffee grinder for optimal grind size.
Guide to dispensing espresso, regular coffee, and long coffee.
How to dispense two cups of coffee sequentially.
Instructions for using the compartment for pre-ground coffee.
Step-by-step guide for brewing with pre-ground coffee.
Procedure for dispensing hot water from the machine.
Step-by-step guide for heating beverages using steam.
Instructions for frothing milk and dispensing coffee for cappuccino.
Procedure to prepare two cappuccinos.
Guide to preparing cappuccinos using the optional Milk Island.
Important notes on milk quantity and cleaning the Milk Island components.
How to program custom quantities for coffee and milk for each beverage.
Accessing and adjusting settings like coffee quantity, temperature, and prebrewing.
Steps to program coffee quantity, temperature, and prebrewing for a selected beverage.
Details on customizing individual beverage preferences.
Adjusting general machine operational parameters.
Accessing and managing maintenance-related functions.
Configuring the machine's energy saving modes.
Overview of special functions available on the machine.
How to set the display language for the machine.
Adjusting the water hardness level for descaling requests.
Enabling or disabling acoustic alarms for button presses.
Turning the water filter replacement notification on or off.
Configuring the automatic rinse cycle for internal circuits.
Enabling or disabling the cup warming surface feature.
Procedure to test water hardness and set the corresponding machine parameter.
How to turn on or off the acoustic feedback for button presses.
Setting up notifications for water filter replacement.
Configuring the automatic rinse cycle for internal circuits.
Controlling the cup warming surface feature for optimal coffee enjoyment.
Guide to setting the current time, date, and preferred time format.
Choosing between 12-hour (AM/PM) and 24-hour time formats.
Setting the current date and selecting the date display format.
Selecting the display format for the date (e.g., DD/MM/YYYY or MM/DD/YYYY).
Accessing menus to manage the Aqua Prima water filter status.
Checking the remaining water treatment capacity before filter replacement.
Guidance on starting the automatic machine descaling process.
Turning the notification for water filter replacement on or off.
Steps to initialize the 'Aqua Prima' water filter after installation.
Displaying remaining water usage before a descaling cycle is needed.
Detailed procedure for performing the automatic descaling process.
Ensuring correct setup before starting the descaling process.
How to add the descaling solution and start the cycle.
Monitoring the descaling process and refilling the water tank.
Steps to perform the rinse cycle after descaling.
Ensuring correct conditions before washing the brew group.
Step-by-step guide to washing the brew group.
Adjusting parameters for energy saving modes.
Setting the time delay before the machine enters energy saving mode.
Enabling and setting timers for automatic machine turn on/off.
Setting the turn on and turn off times for Monday.
Repeating the programming process for other days of the week.
Navigating to and selecting special functions on the machine.
Procedure to reset all custom settings to factory defaults.
Step-by-step guide for cleaning the machine's external parts and reservoirs.
Steps to open the service door and remove the brew group.
Instructions for washing the brew group and correctly reinserting it.
List of guide messages and instructions to remove them.
Solutions for issues related to the machine not powering on.
Resolving problems with hot water, steam, or coffee dispensing.
Troubleshooting brew group removal, coffee brewing, and crema quality.
Immediate actions to take in case of emergency.
Guidelines for safe and intended use of the coffee machine.
Regulations and precautions for connecting the machine to electrical power.
Recommendations for selecting a safe and suitable installation location.
Key warnings regarding appliance hazards like burns, electric shock, and misuse.
Guidelines for dealing with appliance malfunctions and necessary repairs.
Recommended detergents for cleaning circuits and proper usage.
Importance of using only original parts for safety and performance.
Instructions for environmentally responsible disposal of the appliance.
Appropriate fire extinguishers to use with the appliance.
Details on voltage, power, dimensions, weight, and materials.
Information on water tank, hopper capacity, pump pressure, and grinder specs.
Details on the safety devices incorporated in the machine.
