Saeco Talea Ring plus - Steam Dispensing; Steam Dispensing Procedure

13
1 2 3
5 6
7
4
DISPENSING STEAM
Press the button.
Place a container with the
beverage to be warmed up
beneath the steam spout.
Turn the knob to the
position.
Heat the beverage; move the
container while heating.
:KHQ\RXKDYH¿QLVKHGWXUQ
the knob until it is in the rest
position (
).
After dispensing, clean the steam spout as described on page 34.
Repeat the operation to
heat another beverage.
DISPENSING MAY BE PRECEDED BY SHORT SPURTS OF HOT WATER AND SCALDING IS
POSSIBLE. THE HOT WATER/STEAM SPOUT MAY REACH HIGH TEMPERATURES: DO NOT
TOUCH IT WITH BARE HANDS. USE THE APPROPRIATE HANDLE ONLY.
The display shows “brewing in
progress... steam”
selected
steam
brewing in progress
steam