Safer PR90 - Page 72

Globalis International
PR9 SERVICE MANUAL
-
VER1.1
Page
72
of
112
MODULE
PARAMETER OPTIOAN EXPLAIN NOTE
OLIVETTI
CONFIGU
RE
PNS #2021K
NO
YES
Process of invalid
code
“NO”：Command error
if invalid code is
received
“YES”：Ignore the
invalid code.
Relative with
the
PNS7011K
of PR2E
PNS #2022K
NO
YES
Process of bof
“NO”：normal mode
“YES”: PR9 feed
paper to the max
position when the
current vertical
position is right for the
bottom limit, but the
feed paper value
exceed the bottom
limit. And PR9 report
“ESC r X” when it
receive the command
“ESC j”.
Relative with
the
PNS7015K
of PR2E
PNS #2023K
NO
YES
Selecting the special
function of the
command “ESC ! sp
nnn”
“NO”: same as PR2,
the space setting of
the full corner
characters is same as
half corner characters.
“YES”: the space
setting of the full
corner characters is
double as half corner
characters.
Relative with
the
PNS7014K
of PR2E
PNS #2024K
NO
YES
“NO”：normal mode
“YES”: ASCII
characters printing
and the graphic
printing in a same line
are enabled.
Relative with
the
PNS7016K
of PR2E
PNS #2025K
NO
YES
PNS #2026K
NO
YES