POWER CORD
POWER SWITCH/POWER
SUPPLY UNIT
PR9
MAIN BORAD
USB
INTERFACE
PARALLEL
INTERFACE
OPERATING
PANEL
PRINTHEAD
FRONT PAPER
DETECTION
PHOTOSENSOR
SERVICES MOTOR
PAPER FEED
MOTOR
SERIAL
INTERFACE
CARRIAGE
TRANSPORT MOTO
AUTOBORDER
PHOTOSENSOR
CARRIAGE RESET
PHOTOSENSOR
1.8. OPERATING COMMANDS
PR9 operating commands are the following:
－ power switch
－ upper mechanical assembly green lifting lever
－ LCD operating panel
1.8.1. POWER SWITCH
The printer is equipped with a two-pole power switch. The switch on/off command
is provided by means of a rod that crosses the printer longitudinally.
1.8.2. UPPER MECHANICAL ASSEMBLY LIFTING LEVER
The upper mechanical assembly lifting lever (1) is located on the left-hand side of
the printer and is used to lift the upper part of the mechanical assembly so that you
To Next Page
Loading...