Sage Tea Maker BTM800UK - Restore Default Settings; Basket Cycle; Basket Button Not Working; Bubbles Around Temperature Sensor; Tea Taste Too Weak or Too Strong

29
TROUBLESHOOTING
PROBLEM WHAT TO DO
I would like to
have the Tea
Maker™’s default
settings back
• Even when unplugged from the wall outlet, the
Tea Maker™ will remember the last setting used for
each function.
• To restore the Tea Maker™’s default settings for each function,
simultaneously press and hold AUTO START and KEEP
WARM buttons for 2 seconds.
The ‘BASKET
CYCLE’ feature /
BASKET button
does not work
• The basket cycle is only operational during brewing cycles
that are under 10 minutes.
• The tea basket cannot be lowered during the heating up
phase of normal operation.
After boiling
water, bubbles
appear around
the temperature
sensor
• This is normal for the functionality of the Tea Maker™.
My tea tastes too
weak or too strong
• Tea taste is a personal preference and may require
experimentation to get it to your liking. For stronger tasting
tea, increase the amount of tea or brew time (see Page 16 and
20). For a weaker tasting tea, decrease the amount of tea or
brew time (see page 16 and 20).
There is a rattling
noise inside the
glass jug
• This is normal. The noise is from the magnet located
inside the jug post and may be heard when the tea basket is
not attached.