Data localization on the card may be specified. See section Setting up
contactless reader parameters for more information.
Data are stored on the card according to the format detailed in the
Contactless card data structure (MorphoAccess 220 only) section.
To trigger authentication, users should present their MIFARE card to the
terminal. MorphoAccess™ will read the ID stored on the card.
Please present
Contactless
Smart Card
If the ID exists in the selected database, the MorphoAccess™ performs an
authentication using the biometric templates associated to this ID.
On MorphoAccess™ 300, the identifier is searched on every valid
database (5.3 version).
Authentication of
92745
Place your finger
If the authentication is successful, the terminal triggers the access or
returns the user ID to central security controller.
Welcome
92745
AUTHENT. OK
SK-0000011145-05 SAGEM Défense Sécurité document. Reproduction and disclosure forbidden.
41
To Next Page
Loading...