CONTENTS
INTRODUCTION 9
SAFETY INSTRUCTIONS 10
REPLACEMENT OF THE BATTERY LOCATED ON THE MOTHERBOARD 11
GENERAL DESCRIPTION 12
INSTALLATION PROCEDURE 13
STAGE 1: DRILLING THE MOUNTING HOLES 13
STAGE 2: MOUNTING THE METAL CHASSIS ASSEMBLY 14
STAGE 3: CONNECTING THE CHASSIS ASSEMBLY TO THE COVER ASSEMBLY 15
STAGE 4: CLOSING MORPHOACCESS™ 16
HOW TO UPGRADE MORPHOACCESS™ 200 TO 300 17
ELECTRICAL INTERFACE 18
TERMINAL BLOCK BOARD 18
POWER SUPPLY CABLE 19
COM1 RS422 SERIAL PORT WIRING 19
COM1 DEISTER WIRING (OPTIONAL) 20
ETHERNET WIRING 20
COM2 RS232 WIRING 21
WIEGAND OUTPUT WIRING 21
WIEGAND INPUT WIRING 22
DATA CLOCK OUTPUT WIRING 22
DATA CLOCK INPUT WIRING 23
OUTPUT RELAYS AND TAMPER SWITCHES 24
WIEGAND / DATACLOCK: MOTHERBOARD CONFIGURATION 25
USER INTERFACE 27
ACCESS CONTROL BY IDENTIFICATION (MORPHOACCESS™ 200) 28
ACCESS CONTROL BY IDENTIFICATION (MORPHOACCESS™ 300) 29
SK-0000011145-05 SAGEM Défense Sécurité document. Reproduction and disclosure forbidden.
3
To Next Page
Loading...