Sagem MORPHOACCESS 200 - Page 4

ACCESS CONTROL BY AUTHENTICATION – ID SENT ON WIEGAND OR
DATACLOCK 31
CONTACTLESS AUTHENTICATION WITHOUT DATABASE 33
ID ONLY MODE 34
TEMPLATES OR BIOPIN CODE MODE 35
PIN CODE MODE 36
PIN CODE THEN TEMPLATES OR BIOPIN CODE MODE 37
CARD DEFINED MODE 39
CONTACTLESS AUTHENTICATION WITH : STANDARD CARD 40
CONTACTLESS AUTHENTICATION WITH DATABASE: BINARY ID 42
PROXY MODE 45
MERGED MODE 46
AUTHENTICATION MODE WITH DATABASE: USING KEYBOARD ID 47
SOFTWARE ADMINISTRATOR INTERFACE 48
BIOMETRIC MANAGEMENT OPERATIONS 49
BIOMETRIC MANAGEMENT BETWEEN TERMINAL AND MORPHOACCESS™ MANAGEMENT
SYSTEM (MMS) 49
BIOMETRIC MANAGEMENT IN STAND-ALONE MODE 50
INSERT TEMPLATE/ID IN DATABASE 51
REMOVE TEMPLATE/ID FROM DATABASE 51
REMOVE ALL TEMPLATE/ID FROM DATABASE 52
RESET CONFIGURATION TO FACTORY SETTINGS 52
WARM-UP RESET 52
ACCESS THE SET UP FUNCTIONS OF THE SYSTEM 54
CONFIGURATION MENU 56
HOW TO EDIT PARAMETERS? NETWORK PARAMETERS EXAMPLE 57
SYSTEM AND ADMIN PASSWORDS 59
MORPHOACCESS™ SYSTEM ADMINISTRATOR PIN 59
MORPHOACCESS™ ADMINISTRATOR PIN 59
4
SAGEM Défense Sécurité document. Reproduction and disclosure forbidden. SK-0000011145-05