Sagem MORPHOACCESS 200 - Page 5

SETTING UP HOST COMMUNICATION. 60
SETTING UP MATCHING PARAMETERS 61
SETTING UP JUVENILE RECOGNITION 61
SETTING UP ANTI-LATENCY 61
SETTING UP RECOGNITION MODE 62
MATCHING THRESHOLD 64
USER INTERFACE SETTINGS 66
MULTILINGUAL APPLICATION 66
IDENTIFICATION INFORMATION 67
CLOCK 68
IDLE MODE 68
DISPLAY PERSONALIZATION 69
SETTING UP CONTACTLESS READER PARAMETERS 70
LOG FILE 72
SETTING UP TIME MASK 73
SETTING UP DOWNLOAD AGENT - (SDL) 74
WIEGAND / DATACLOCK CONFIGURATION 75
NOTE 75
WIEGAND / DATACLOCK : ID SENDING 75
WIEGAND / DATACLOCK : ADVANCED INFORMATIONS 76
WIEGAND : FACILITY CODE 76
WIEGAND : FACILITY CODE VERIFICATION 77
DATACLOCK : DATA AND STROBE LEVELS 77
WIEGAND / DATACLOCK : LED OUT – CARD PRESENT SIGNALS 77
WIEGAND / DATACLOCK : LED IN SIGNAL 79
SETTING UP WIEGAND INTERFACE 80
ID SENDING ON UDP 82
ID SENDING ON RS232 OR RS422 83
ID SENDING ON « COM1 » 83
ID SENDING ON « COM2 » 83
SK-0000011145-05 SAGEM Défense Sécurité document. Reproduction and disclosure forbidden.
5