Contrary to the standard mode data are not stored in a structure.
Data localization on the card may be defined. See section Setting up
contactless reader parameters for more information. The “block” notion is
detailed in this section.
If the authentication fails a second attempt is possible without representing
the card.
ID offset from first read bloc
/cfg/Maccess/Contactless/ID offset
[0-15]: ID offset in the first read
block (B parameter).
ID size in bytes
/cfg/Maccess/Contactless/ ID size
[1-8]: ID size in bytes
ID length in database is limited to 24 characters. It means that the binary
ID length is limited to 8 bytes.
SK-0000011145-05 SAGEM Défense Sécurité document. Reproduction and disclosure forbidden.
43
To Next Page
Loading...