With a MorphoAccess™ 220, contactless parameters can be defined from
the CONFIG menu in file /cfg/Maccess, in section Contactless.
Reader type (MA220)
/cfg/Maccess/contactless/
Reader type
0 No MIFARE reader is used.
1 External MIFARE
2 Deister reader is used. Internal MIFARE reader is
used.
Warning : the value of this key is set to 0 (zero) by the ILV command
« Default_Init » and by the « RST CFG » action of the Administrator mode.
First block number to read
/cfg/Maccess/contactless/B
4 (default) to 13
Number of blocks to read (form B)
/cfg/Maccess/contactless/N
2 When an ID is stored.
28 When templates are stored.
Security key
/cfg/Maccess/contactless/C
1 MIFARE security key A then
B is selected (default)
2 MIFARE security key A is
selected.
3 MIFARE security key B is
selected.
SK-0000011145-05 SAGEM Défense Sécurité document. Reproduction and disclosure forbidden.
71
To Next Page
Loading...