Sagem MORPHOACCESS 200 - Page 84

ID transmission on port COM2 is disabled when ILV is activated on
the same channel (i.e. cfg/Maccess/Admin/Host Com set to 2).
COM2 parameters are defined by cfg/ser1.
Identifier format (COM2)
ID format (COM2)
/cfg/Maccess/COM2/Format
0 L’ID is sent in ASCII.
1 L’ID is sent in Hexa.
2 L’ID is sent in BCD
84
SAGEM Défense Sécurité document. Reproduction and disclosure forbidden. SK-0000011145-05