Note : In case of badge wait (mode 1,3,4,5) or Id presentation, the timeout
message is nor displayed nor logged and/or sent to the controller.
Time attendance can also be displayed in graphic mode:
two functions mode
four functions mode
Time Attendance can be configured from the CONFIG menu thanks to the
keys present in the section /cfg/Maccess/time attendance.
The allowed values are:
Configuration time attendance
/cfg/Maccess/time attendance/
mode
0 Time attendance is disabled.
1 Time attendance is enabled with two
functions: IN and OUT.
2 Time attendance is enabled with four
functions IN, IN (from) DUTY, OUT (on)
DUTY and OUT.
display
0 Keys label are in English.
1 Keys label are in Spanish.
2 Keys label are in French.
3 Switches to graphic mode (default value).
SK-0000011145-05 SAGEM Défense Sécurité document. Reproduction and disclosure forbidden.
89
To Next Page
Loading...