Page 2
Wall Mounting
The number of the screw: 2 pcs
Direction for wall mounting: LED panel upward.
Dimension for the screw: 5~7.5 mm
There are 2 slots on the underside of the modem that can be used for wall mounting.
You will need 2 suitable screws which screw diameter would be 5~7.5 mm to wall mount the Cable Gateway.
Note: When wall mounting the unit, ensure that it is within reach of the power outlet.
To wall mount the unit:
1. Ensure that the wall you use is smooth, flat, dry and sturdy and use the 2 screw holes which are 120 mm apart from
each other.
2. Fix the screws into wall, leaving their heads 3 mm (0.12 inch) clear of the wall surface.
3. Remove any connections to the unit and locate it over the screw heads. When in line, gently push the unit on to the
wall and move it downwards to secure.
To Next Page
Loading...
Need help?
General
