GENERAL DESCRIPTION
INTRODUCTION
SAILOR
RI120
is a main receiver intended for reception of A3, A3H, A3A, A3J,
A2, A2H, Al & Fl signals in the.frequency range
10
kHz to 30 MHz.
SAILOR RI120 uses a digital synthesizer for frequency generation, and thus
can be set to any frequency in the above mentioned frequency range. The digi-
tal synthesizer is controlled from a key board or the built-in continuous tu-
ning wheel, the frequency selected is displayed on a six segment liquid cry-
stal display (LCD). The frequency stability is controlled from one 10 MHz TCXO.
SAILOR RI120 is prepared for use in conjunction with telex and faximile equip-
ment.
SAILOR RI120 is provided with higher order tunable RF filters to ensure good
duplex performance. 0
SAILOR RI120 has automatical RF filter selection.
SAILOR R1120 fits into SAILOR lg'l rack system.
SAILOR RI120 can be supplied with a selfcontaining cabinet H1225, and an
AC/DC power supply N1405 with automatic change-over from AC to DC.
To Next Page
Loading...
Need help?
General
