SERVICE
1, MAINTENANCE
2, NECESSARY TEST EQUIPMENT
3, TROUBLE-SHOOTING
4, PERFORMANCE CHECK
5, ADJUSTMENT PROCEDURE
6, NECESSARY ADJUSTMENTS AFTER REPAIR
7, FUNCTION CHECK
8, MECHANICAL DISASSEMBLING T1127 ONLY
1, MAINTENANCE
1.1.
When the SAILOR SHORT WAVE SET type
1000
has been correctly installed, the main-
tenance can, dependent on the environment and working hours,
be
reduced to a per-
formance check at the service workshop at intervals not
exceeding 5
years. A com-
plete performance check list is enclosed in the PERFORMANCE CHECK section.
Also inspect the antennas, cables and plugs for mechanical defects, salt deposits,
corrosion and any foreign bodies.
Along with each set a TEST SWEET is delivered, in which
some
of the measurings
made at the factory are listed. If the performance check does not show the same
values as those on the TEST SHEET, the set must be adjusted as described under
ADJUSTMENT PROCEDURE.
Any repair of the set should be followed by a FUNCTION CHECK of the unit in
question.
16
To Next Page
Loading...
Need help?
General
