Need help?Do you have a question about the Sailor S6000 series and is the answer not in the manual?
Important safety measures to follow when using the service tool to prevent radio defects or data loss.
Steps to access the service tool directly from a PC via Ethernet without a network connection.
Steps to access the service tool from a PC via a LAN connection using an internet browser.
Displays current platform and hardware configuration, including firmware version and serial number.
Access to logs for received/transmitted DSC calls and the system log, downloadable as tar.gz files.
Displays a stream of NMEA data collected over SERIAL and/or LAN, downloadable as a compressed file.
Allows configuration of ITU and private channels, including receive/transmit frequencies and scan settings.
Enables configuration of MMSI, call ID, slave delay, ATU, PSU monitor, and primary station settings.
Provides options for firmware updates, factory resets, saving, and loading configurations.
To Next Page
General
