Sailor S6000 series User Manual

97-147768-A SAILOR 6300B MF/HF Service Interface User Manual
14
Figure 10: CONFIG tab – Configuration side-bar page continued.
Options
Description
Enter code to enable telex
Enter the
option
code to enable telex.
After entering, the
option can be removed again by de-checking the check box
D6 option
De
-
select
check box
to disable D6
(6 channel watch keeping
receiver). To re-enable, input the option code.
Low Power Mode Only
Transmit is only allowed at low output power.
External modem enabled
If the radio is used in connection with external modem
,
enable this option to achieve correct power output.
Enable active antenna
Check this option to enable s
upply current for active
antenna (12VDC max 60mA).
Scan hang time
H
ang time, in seconds
, to wait on a channel with signal,
before resuming the scan.

Sailor S6000 series Specifications

General

Brand	Sailor
Model	S6000 series
Category	Radio
Language	English