Need help?Do you have a question about the SainSmart GENMITSU 3018-PRO and is the answer not in the manual?
Assembling the base structure of the CNC router using aluminum profiles and phenolic plates.
Installing the table surface, lead screw, and step motor for the CNC machine.
Attaching the Bakelite-C component to the main base structure.
Assembling the X and Z axes, including the spindle and motor.
Attaching the Bakelite-D structural component to the machine.
Mounting the spindle motor onto the CNC machine assembly.
Installing the control board onto the CNC machine frame.
Understanding and connecting the electrical wiring for the CNC machine.
Installing necessary drivers for the CNC machine's USB communication.
Locating the correct COM port for the CNC machine in the device manager.
Connecting and configuring the Grblcontrol software with the CNC machine.
Using Grblcontrol for spindle speed, axis jogging, and tool setup.
Connecting the offline controller to your computer using a USB cable.
Copying G-code files and connecting the offline controller to the main control board.
Navigating the offline controller's menu, control, and file selection pages.
General| Model | GENMITSU 3018-PRO |
|---|---|
| Category | Control Systems |
| Working Area | 300 x 180 x 45 mm |
| Control Software | GRBL |
| Power Supply | 24V 5.6A |
| Connectivity | USB |
| Machine Size | 400 x 330 x 240 mm |
| Frame Material | Aluminum |
| Spindle | 775 spindle motor (12-36V) 24V:10000rpm |
| Supported OS | Windows, Mac OS, Linux |
| Stepper Motor | 1.3A |
| Supported Materials | Wood, plastic, acrylic, PCB |
| Net Weight | 7.5 kg |
To Next Page
