44
SAIPA 141 / Maintaining and repairing manual Body and trimming
1- All around the doors and between the
door strip and the face.
2- Sealing the engine hood between the
door strip and the engine panel
Sealing places:
In order to strengthen to some parts, avoid-
ing the unwanted vibration and noise and
also sealing, one should use sealer.
It is usual to seal between two welded parts
like the inner and outer parts of the doors.
In the following some sample of the sealing
places will be introduced:
Assembling and disassembling of parts
To Next Page
Loading...
