47
SAIPA 141 / Maintaining and repairing manual Body and trimming
Caution 2:
Due to the harmful gases that initiate from
colors, anti-oxidation materials and … be
cautious that there would be any kind of
safety tools to protect the employee.
Caution 3:
If you want to cut from the welded area,
separate the weld points by the means of
drills or pliers.
Caution 4:
It is recommended that cut the parts from
the specic line at the exploded map to
avoid damage and changing in dimensions.
Try to reach the assembling procedures at
the plant.
Caution 5:
Remove the surface color by the appropri-
ate means and identify the cutting line.
Select the cutting line from the places that
has the minimum curves.
Assembling and disassembling of parts
To Next Page
Loading...
