PARTS LIST
18
You will note a letter (A, B, C, etc.) stamped on the top of the motor mount. This letter identifies the
production version of your engine. Should you ever need to order a part or have a question pertaining to
your engine, specify this letter along with the engine type. This will allow ease in identifying your engine.
Saito Twin Cylinder Prop Chart
NOTE: All recommendations are based on engines using APC props, Power Master 15%
2-stroke fuel, and McCoy MC-4C glow plugs.
ENGINE SPORT SCALE
FA-60T 10x6, 10x7 11x5, 11x6, 12x4
2000–10,500 rpm 11x5, 11x6, 12x5 12x5
FA-90TS
2,000–10,000 rpm 12x8, 13x6, 13x8 13x8, 14x6
FA-100T/130TD 12x8, 13x6, 13x8 13x8, 14x6, 14x8
2000–10,500 rpm 14x6 15x4, 15x5
FA-182TD 14x12, 14x10, 15x10 16x6, 16x8, 16x10
2000–10,500 rpm 15x8, 16x6, 16x8 18x6
FA-300TL/300TTDP 18x10, 20x8, 20x10, 20x8, 20x10, 22x8
2000–6000 rpm 20x12, 22x8, 22x10 22x10, 24x8
NOTE: Observe operating rpm ranges as excessive rpm can result in damage to the engine.
Propeller Selection
Below you will find a propeller
selection chart. This chart will enable
you to select the best propeller for
initial set-up of your Saito engine.
Remember, it is imperative to
balance each propeller prior to
installation onto your Saito engine.
Failure to do so may cause unwanted
vibration in your aircraft.