Saito FA-60T - User Manual

TWIN-CYLINDER FOUR-STROKE ENGINES
INSTRUCTION MANUAL
• FA-60T
• FA-90TS
• FA-100T
• FA-130TD
• FA-182TD
• FA-300TL
• FA-300TTDP

Saito FA-60T Specifications

General

Brand	Saito
Model	FA-60T
Category	Engine
Language	English

Summary

Safety Instructions

You should always:

Essential safety practices for mounting and operating the engine.

Safety Precautions

Key safety measures to follow during engine operation.

Propeller Safety Warnings

Critical warnings regarding propeller interaction and handling.

Recommended Practices

Recommended safety measures for operation.

Engine Operation Warnings

Important notes on engine heat and fumes.

Disassembly Warning

Caution against unauthorized engine disassembly.

Support Equipment

Break-In Procedure

Break-In Fuel and Glow Plugs

Specifies the type of fuel and glow plugs for break-in.

Propeller Selection for Break-In

Guidance on selecting the correct propeller for break-in.

Carburetor Settings for Break-In

Instructions for setting needle valves during break-in.

Tachometer Recommendation

Importance of using a tachometer for adjustments.

Starting The Engine

Pre-Start Checks

Essential checks before starting the engine.

Fuel Line Connections

Proper connection of fuel lines for different models.

Engine Priming

Step-by-step guide to priming the engine.

Muffler and Line Connections

Fuel Tank Filling

Engine Starting Sequence

Dual Plugged Engine Ignition

Using Starting Aids

Hydro-Lock Prevention

Initial Break-In RPM Limit

Post Break-In Mounting

Low Speed Carburetor Adjustments

Idle Adjustment Procedure

Mixture Adjustment Clarification

Throttle Trim Adjustment

Dual Carburetor Adjustment (FA-100 T;130 TD;182 TD)

Balancing Dual Carburetors (FA-100 T;130 TD;182 TD)

FA-300 TTDP Dual Carburetor;Fuel Pump Adjustment

High Speed Needle Valve Adjustments (FA-300 TTDP)

Idle Needle Valve Adjustment (FA-300 TTDP)

Fuel Pump Adjustment (FA-300 TTDP)

Normal Engine Operation

Engine Mounting and Initial Flight

General Operating Procedures

Breather Nipple Function

Engine Maintenance

Disassembly Warning

Cylinder Identification

Cam Gear Alignment (FA-60 T;90 TS)

Cam Gear Alignment (FA-100 T;FA-130;FA-182 TD)

Reassembly Instructions

Valve Clearance Adjustment

Carburetor Maintenance

Tips For Extended Engine Life

Troubleshooting

Engine Failure to Fire

Causes and corrective actions for engine not firing.

Engine Not Running After Firing

Troubleshooting for engines that fire but don't run.

Engine Stalling or Quitting

Causes and fixes for engine stopping after starting.

Rough Idle Issues

Troubleshooting for rough idle or engine quitting.

Propeller Selection