SAJ H1-6K-S2 - User Manual

Questions and Answers

K
knightjoseSep 18, 2025
What does 'DVI Consis Err' mean on my SAJ Inverter?
- J
  Jennifer RichardsSep 18, 2025
  The 'DVI Consis Err' on your SAJ Inverter indicates a data consistency issue with the DVI.
K
kathleen37Aug 25, 2025
What does 'Temp.High Err' mean on SAJ H1-6K-S2 Inverter?
- I
  Isaac RussellAug 25, 2025
  If your SAJ Inverter displays 'Temp.High Err', this indicates a high temperature issue.
J
Juan MunozAug 25, 2025
What does 'GFCI Err' mean on my SAJ Inverter?
- K
  kmillerAug 26, 2025
  If your SAJ Inverter displays 'GFCI Err', this indicates a GFCI error.
J
Jennifer JohnsonAug 27, 2025
What does 'PV1 Volt.High Err' mean on my SAJ H1-6K-S2 Inverter?
- L
  Lisa MelendezAug 27, 2025
  The 'PV1 Volt.High Err' on your SAJ Inverter means there is PV1 over-voltage.
A
Aaron MolinaSep 22, 2025
What does 'CHG1 Curr Err' mean on my SAJ Inverter?
- K
  kimreginaSep 22, 2025
  If your SAJ Inverter displays 'CHG1 Curr Err', this indicates a charging bridge 1 current error.
C
Christopher GreenSep 23, 2025
What does 'BMS Device Err' mean on my SAJ Inverter?
- E
  Elijah AlvarezSep 23, 2025
  If your SAJ Inverter displays 'BMS Device Err', this indicates a BMS Device Error.
L
lawsontonySep 9, 2025
What does 'Temp.Low Err' mean on SAJ Inverter?
- S
  smithjamesSep 9, 2025
  If your SAJ Inverter displays 'Temp.Low Err', this indicates a low temperature issue.
A
Ashley ReidSep 12, 2025
What does 'Lost Com.MS Err' mean on my SAJ Inverter?
- K
  Kathryn ShafferSep 12, 2025
  The 'Lost Com.MS Err' on your SAJ Inverter indicates interior communication problems.
J
Jennifer ColemanSep 3, 2025
What does 'HWPV2 Curr.High Err' mean on my SAJ H1-6K-S2 Inverter?
- S
  Suzanne GonzalesSep 3, 2025
  The 'HWPV2 Curr.High Err' error on your SAJ Inverter indicates PV2 hardware over-current.
J
james52Sep 1, 2025
What does 'HWInv Curr.High Err' mean on my SAJ H1-6K-S2 Inverter?
- E
  Erica WalkerSep 1, 2025
  The 'HWInv Curr.High Err' on your SAJ Inverter indicates an inverter hardware over-current.

Summary

Chapter 1 Safety Precautions

1.2 Safety Instructions

Explains hazard symbols (Danger, Warning, Caution, Notice) and their meanings.

Chapter 2 Preparation

2.2 Safety Instructions

Lists critical safety warnings related to electrical shock, high voltage, and environmental conditions.

Chapter 3 Product Information

3.3 Datasheet

Provides comprehensive technical specifications, including input/output data and protection features.

Chapter 4 Instructions for Installation

4.1 Safety Instructions

Outlines essential safety precautions to be followed before and during inverter installation.

4.4 Mounting Procedure

Chapter 5 Electrical Connection

5.1 Safety Instruction for Hot-line Job

Emphasizes safety protocols for technicians performing electrical connections on live equipment.

5.3 AC Grid Wire and Backup Output Connection

5.4 PV Connection

5.5 Battery Connection

5.7 Communication Connection

5.9 Ground Connection

5.10 External AC Circuit Breaker and Residual Current Device

Chapter 6 Debugging Instructions

6.2 First Run Setup

Guides users through initial system configuration, time setting, and country selection.

Chapter 7 Fault Code and Troubleshooting

Master Device Error

Lists and explains fault codes and types for the master device.

Slave Device Error

Lists and explains fault codes and types for slave devices.

Display Board Error

Lists and explains fault codes and types for the display board.

SAJ H1-6K-S2 Specifications

General

Number of MPP Trackers	2
THDi	< 3%
European Efficiency	97.5%
Protection Degree	IP65
Cooling Method	Natural convection
Rated Power	6 kW
Rated AC Output Power	6 kW
Rated AC Voltage	230 V
AC Voltage Range	180 V - 280 V
Rated Grid Frequency	50 Hz / 60 Hz
DC Switch	Yes
Operating Temperature Range	-25°C to 60°C
Communication	WiFi
Operating Temperature	-25°C to 60°C
Humidity	0-100%