EasyManua.ls Logo

SAJ H2 Series User Manual

SAJ H2 Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
H2 Series
Tel: (86)20 66608588 Fax: (86)20 66608589 Web: www.saj-electric.com
Add: SAJ Innovation Park,No.9, Lizhishan Road,Science City, Guangzhou High-tech Zone , Guangdong, P.R.China
GUANGZHOU SANJING ELECTRIC CO.,LTD
H2 Series
SAJ HYBRID SOLAR INVERTER
USER MANUAL
H2-5~10K-S3
V1.1

Other manuals for SAJ H2 Series

Questions and Answers:

SAJ H2 Series Specifications

General IconGeneral
TypeHybrid Inverter
Output Voltage220/230/240V
Output Frequency50/60Hz
Battery CompatibilityLithium
CommunicationRS485
Max. DC Input Power (kW)12kW
Max. AC Output Power (kVA)10kVA
Operating Temperature-25°C to +60°C
Storage Temperature-40°C to +70°C
MPPTDual MPPT

Summary

1. SAFETY PRECAUTIONS

1.1 Scope of Application

Manual covers installation, operation, maintenance, and troubleshooting for SAJ H2 series products.

1.2 Safety Instructions

Provides critical warnings and cautions for safe operation and installation of the inverter.

1.3 Target Group

Specifies that only qualified electricians should perform installation and maintenance tasks.

2. PREPARATION

2.1 Safety Instructions

Detailed safety instructions covering dangers, warnings, and cautions for inverter operation.

2.2 Explanations Of Symbols

Explains the meaning of various safety symbols used throughout the manual and on the device.

3. PRODUCT INFORMATION

3.1 Application Scope of Products

Describes the H2 series inverter's application in on-grid and off-grid solar systems.

3.2 Specification for Product Model

Explains the naming convention and key specifications for different H2 series inverter models.

3.3 Overview of Product

Provides physical dimensions and a visual overview of the H2 inverter's design.

3.4 Terminals Description

Details the function and purpose of each terminal port on the H2 inverter's electrical interface.

3.5 Datasheet

Presents comprehensive technical specifications for various H2 series inverter models.

4. INSTRUCTIONS FOR INSTALLATION

4.1 Unpacking and Inspection

Guidance on checking package contents and inspecting the inverter for damage upon delivery.

4.2 Installation Method and Position

Specifies recommended installation locations, environmental conditions, and clearance requirements.

4.3 Mounting Procedure

Provides step-by-step instructions for physically mounting the inverter onto a wall.

5. ELECTRICAL CONNECTION

5.1 Additional Grounding Cable

Details the process and importance of connecting an additional grounding cable for electrical safety.

5.2 AC Grid Wire and Backup Output Connection

Instructions for connecting AC power cables for grid connection and backup output.

5.3 PV Side Connection

Instructions for safely and correctly connecting the photovoltaic (PV) array to the inverter.

5.3.1 PV Connector Assembly

Detailed steps for assembling PV connectors and securely connecting DC cables to the inverter.

5.4 Communication Connection

Explains how to connect communication cables to ports for EMS, CT, DRM, CAN, and other modules.

5.5 Communication Module Installation

Guidance on installing communication modules such as 4G/Wi-Fi for connectivity.

5.6 Connecting Battery Power Cable

Instructions for safely connecting the high-voltage battery power cables to the inverter.

5.7 Battery Connection

Details on connecting the battery to the inverter, including breaker and cable specifications.

5.8 System Connection

Illustrates system connection diagrams for grid systems, including Australia/New Zealand specific configurations.

5.9 System Connection Diagram

Provides a comprehensive diagram of the entire system connection: PV, inverter, grid, loads, and meters.

5.10 AFCI (Optional)

Explains the function of the optional Arc Fault Circuit Interrupter (AFCI) for fire prevention.

6. COMMISSIONING

6.1 Start Up and Shut Down the Energy Storage System

Details the procedures for initiating and safely shutting down the energy storage system.

6.2 Introduction of Human-Computer Interface

Overview of the inverter's interface elements and initial system commissioning steps.

6.3 Commissioning

Lists the sequential steps required for system commissioning and verification.

6.4 eSAJ APP Connection

Guides on connecting to the eSAJ mobile application for monitoring and control.

6.4.1 Account Login

Steps for registering a new account and logging into the eSAJ Home application.

6.4.2 Local Connection

Detailed instructions for establishing a direct local connection to the inverter via the eSAJ app.

6.4.3 Protection parameter setting

Explains how to modify and save protection parameters through the eSAJ app.

6.4.4 Inverter Setting Review

How to view device information, running status, and event logs after commissioning.

6.4.5 Remote Monitoring

Guidance on remotely monitoring the inverter's performance via web portal or mobile apps.

6.5 Working Modes

Describes the different operational modes available for the inverter, such as Self-consumption and Back-up.

6.6 Export Limit Setting

Instructions on how to set export limitations for the inverter using the eSAJ app.

6.7 Self-test (For Italy)

Procedure for performing the CEI0-21 required self-test for Italian grid connection compliance.

6.8 Setting Reactive Power Control (For Australia)

Guides on setting reactive power control modes for Australian grid regulations.

6.8.1 Setup Fixed Power Factor Mode & Fixed Reactive Power Mode

Steps to configure fixed power factor and fixed reactive power settings via the app.

6.8.2 Setup V-Watt and Volt-Var Mode

Instructions for setting V-Watt and Volt-Var modes as per AS/NZS 4777.2:2020 grid standards.

7. TRANSPORTATION &DISPOSAL

7.1 Transportation

Advice on safe transportation and storage practices for the inverter, including stacking limits.

7.2 Recycling and Disposal

Guidelines for environmentally responsible disposal of the inverter at its end-of-life.

8. ROUTINE MAINTENANCE

Inverter Cleaning

Instructions for cleaning the inverter's enclosure lid and LED indicators with a moist cloth.

Heat Sink Cleaning

Guidance on cleaning the inverter's heat sinks with a dry cloth or air blower.

9. TROUBLESHOOTING & WARRANTY

Troubleshooting

Lists various fault codes and their corresponding information for diagnosing and resolving inverter issues.

Warranty

Information on warranty terms and conditions, directing users to the SAJ website.

Related product manuals