What to do if my SAJ Inverter shows a High Temperature Error?
If your SAJ Inverter displays a High Temperature Error, first check if the radiator is blocked. Also, verify that the inverter is operating within an appropriate temperature range (not too high or too low). If both the radiator and temperature conditions are normal, it is recommended to contact your distributor or SAJ technical support for further assistance.
What to do if I see a Current Sensor Error on my SAJ Inverter?
If you frequently encounter a Current Sensor Error with your SAJ Inverter, it is recommended to contact your distributor or call SAJ technical support for assistance.
What to do if my SAJ R6-40K-T4-32 displays a Relay Error?
If a Relay Error occurs frequently with your SAJ Inverter, please contact your distributor or call SAJ technical support.
What should I do if my SAJ R6-40K-T4-32 Inverter shows a Master Lost Communication error?
If you frequently encounter a Master Lost Communication error with your SAJ Inverter, it is recommended to contact your distributor or call SAJ technical support for assistance.
What should I do if my SAJ R6-40K-T4-32 is showing a Storer Error?
If a Storer Error occurs frequently with your SAJ Inverter, please contact your distributor or call SAJ technical support.
What to do if SAJ R6-40K-T4-32 shows AC Voltage Error?
To address an AC Voltage Error on your SAJ Inverter, first, check the voltage of the grid and ensure the connection between the inverter and the grid is secure. Verify the on-grid standard settings of the inverter. If the grid voltage is too high, consult with local grid workers about adjusting the voltage or changing the regulated voltage value. If the grid voltage is within the allowed range and the error persists, contact your distributor or SAJ technical support.
General| Max. DC Input Voltage | 1100 V |
|---|---|
| Start Voltage | 200 V |
| MPPT Voltage Range | 200-1000 V |
| Rated AC Output Power | 40000 W |
| Max. AC Apparent Power | 44000 VA |
| Rated AC Voltage | 400 V |
| THDI | <3% |
| AC Grid Frequency | 50/60 Hz |
| MPPT Efficiency | 99.9% |
| DC Connection | MC4 |
| Protection Degree | IP65 |
| Operating Temperature Range | -25°C to +60°C |
| Cooling Method | Natural convection |
| Weight | 55 kg |
| Number of MPP Trackers | 4 |
| Maximum Input Current per MPPT | 26 A |
| AC Output Rated Voltage | 400 V |
| Protection Level | IP65 |
| Max. DC Input Power | 60000 W |
| Power Factor | 0.8 leading to 0.8 lagging |
| Maximum PV Input Power | 60000 W |
| Humidity Range | 0-100% |
| Communication | RS485, Ethernet, Wi-Fi |
Defines hazard symbols (DANGER, WARNING, CAUTION, NOTICE) and their meanings for safe operation.
Provides critical safety instructions regarding electrical hazards and proper preparation procedures.
Provides detailed technical specifications for R6 series inverters, including input, output, and protection features.
Provides critical safety warnings related to installation, including electrical hazards and environmental factors.
Guides on marking drill holes, preparing the rear panel, and installing the inverter onto the mounting bracket.
Emphasizes safety precautions for electrical connections, requiring professional technicians and protective equipment.
Provides recommendations for AC connection, including cable specifications and grounding procedures.
Lists error codes and their corresponding explanations for diagnosing inverter faults.
Provides step-by-step troubleshooting guidance for common inverter faults.
To Next Page
