EasyManua.ls Logo

SAJ R6 S2 Series - User Manual

SAJ R6 S2 Series
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
R6 Series Solar Inverter
{=2*{page}-1}
Tel: (86)20 66608588 Fax: (86)20 66608589 Web: www.saj-electric.com
Add: SAJ Innovation Park,No.9, Lizhishan Road,Science City, Guangzhou High-tech Zone , Guangdong, P.R.China
GUANGZHOU SANJING ELECTRIC CO.,LTD
R6 Series
SOLAR INVERTER USER MANUAL
R6-5~10K-S2-X R6-5~10K-S3
V0.1

Table of Contents

Questions and Answers

  • J
    Julie WilsonAug 16, 2025
    What to do if my SAJ Inverter shows an AC Voltage Error?
    • J
      Justin GarciaAug 16, 2025
      If your SAJ Inverter displays an AC Voltage Error, check the grid voltage, the connection between the inverter and the grid, and the inverter's on-grid standard settings. If the grid voltage is outside the regulated range, consult with local grid workers about adjusting the voltage or changing the regulated voltage value. If the grid voltage is within the allowed range and the error persists, contact your distributor or SAJ technical support.
  • W
    William AguilarAug 22, 2025
    Why does my SAJ R6 S2 Inverter show a Grid Lost Error?
    • M
      Megan OlsonAug 22, 2025
      If your SAJ Inverter is showing a Grid Lost Error, check the connection status between the AC side of the inverter and the grid. If the connection is correct and the error persists, contact your distributor or SAJ technical support.
  • A
    Andrew MahoneyAug 25, 2025
    What to do if my SAJ R6 S2 Inverter displays a Frequency Error?
    • K
      Katrina JonesAug 26, 2025
      If your SAJ Inverter displays a Frequency Error, check the country setting and the frequency of your local grid. If these settings are correct and the problem continues, contact your distributor or SAJ technical support for assistance.
  • J
    Jennifer FreemanAug 27, 2025
    What does ISO Error mean on my SAJ R6 S2 and how can I fix it?
    • L
      lmartinAug 27, 2025
      If your SAJ Inverter displays an ISO Error, check the insulation resistance of the positive and negative sides of the solar panel. Also, check if the inverter is in a wet environment and verify the grounding of the inverter. If the error persists, contact your distributor or SAJ technical support.
  • M
    Monique JonesAug 30, 2025
    How to resolve Over Bus Voltage on a SAJ R6 S2?
    • B
      bphillipsAug 30, 2025
      To resolve an Over Bus Voltage error on your SAJ Inverter, check the settings of the solar panel. You may want to consult with a SAJ designer for assistance. If the issue persists, contact your distributor or SAJ technical support.
  • D
    Donna McintoshSep 2, 2025
    Why is my SAJ R6 S2 showing a High Temperature Error?
    • M
      Michael ClarkSep 2, 2025
      If your SAJ Inverter is showing a High Temperature Error, check whether the radiator is blocked and whether the inverter is operating in an environment with excessively high or low temperatures. If these checks do not resolve the issue, contact your distributor or SAJ technical support.
  • J
    Jeremy McmahonSep 4, 2025
    What to do for Lost Communication error on SAJ R6 S2?
    • C
      Crystal JohnsonSep 4, 2025
      To address a Lost Communication error on your SAJ Inverter, check the communication cable connections between the control board and the display board. If the connections are secure and the error persists, contact your distributor or SAJ technical support.
  • J
    James PatelSep 7, 2025
    How to fix Null line-to-earth voltage fault on SAJ R6 S2 Inverter?
    • J
      Jon LoveSep 7, 2025
      To fix a Null line-to-earth voltage fault on your SAJ Inverter, check if the connection of the AC output grounding terminal is stable and reliable. If the connection is secure and the problem persists, contact your distributor or SAJ technical support.
  • T
    Tiffany ParrishSep 10, 2025
    What should I do if my SAJ R6 S2 Inverter shows a Relay Error?
    • J
      Jason MyersSep 12, 2025
      If your SAJ Inverter frequently shows a Relay Error, contact your distributor or SAJ technical support for assistance.
  • V
    Vanessa RodriguezSep 10, 2025
    How to troubleshoot GFCI Error on SAJ R6 S2?
    • T
      Tim CraigSep 12, 2025
      To troubleshoot a GFCI Error on your SAJ inverter, check the insulation resistance of the positive and negative sides of the solar panel. Also, verify that the inverter is not in a wet environment and that the grounding is secure. If the problem persists after these checks, contact your distributor or SAJ technical support.

SAJ R6 S2 Series Specifications

General IconGeneral
BrandSAJ
ModelR6 S2 Series
CategoryInverter
LanguageEnglish

Related product manuals