What to do if my SAJ R6-50K-T4-32 Inverter shows a High Temperature Error?
If your SAJ Inverter displays a High Temperature Error, first check if the radiator is blocked. Also, verify that the inverter is operating within an appropriate temperature range (not too high or too low). If both the radiator and temperature conditions are normal, it is recommended to contact your distributor or SAJ technical support for further assistance.
General| Rated Power | 50 kW |
|---|---|
| Max. DC Input Power | 75 kW |
| Maximum PV Input Power | 75 kW |
| Max. DC Voltage | 1100 V |
| Maximum PV Input Voltage | 1100 V |
| Start-up Voltage | 200 V |
| MPPT Voltage Range | 200-1000 V |
| Number of MPPTs | 4 |
| Max. Input Current per MPPT | 32 A |
| Maximum Input Current per MPPT | 32 A |
| Rated AC Output Power | 50 kW |
| AC Rated Output Power | 50 kW |
| Max. AC Apparent Power | 55 kVA |
| Rated AC Voltage | 400 V |
| AC Output Voltage Range | 310-480 V |
| AC Voltage Range | 310-480 V |
| Rated Grid Frequency | 50/60 Hz |
| AC Output Frequency | 50/60 Hz |
| THDi | <3% |
| Power Factor | 0.8 leading to 0.8 lagging |
| Max. Efficiency | 98.7% |
| Maximum Efficiency | 98.7% |
| DC Switch | Yes |
| Protection Level | IP66 |
| Operating Temperature Range | -25°C to +60°C |
| Humidity Range | 0-100% (non-condensing) |
| Communication | RS485, WiFi, Ethernet |
To Next Page
