SAJ R6-50K-T4-32 Quick Installation Guide

2 pages

To Next Page

Inverter Quick Installation Guide

This installation guide is applicable to R6-15K/17K/20K/22K/25K-T2-32, R6-25K-T2-32-B, R6-25K/30K/33K/36K-

T3-32, R6-25K/30K-T3-32-B, R6-36K/40K/50K-T4-32, R6-5K/6K/8K/10K/15K-T2-32-LV, R6-20K-T3-32-LV, R6-

25K/30K-T4-32-LV grid-tied inverter.

1、Installation ways and gaps

Fig. 1.1 Installation ways

Fig. 1.2 Installation gaps

2、Hanging panel size and drill hole

Fig. 2.1 R6-15K/17K/20K/22K/25K-T2-32, R6-25K-T2-32-B, R6-5K/6K/8K/10K/15K-T2-32-LV hanging panel size

Fig. 2.2 R6-25K/30K/33K/36K-T3-32, R6-25K/30K-T3-32-B, R6-36K/40K/50K-T4-32, R6-20K-T3-32-LV, R6-25K/30K-T4-32-LV hanging panel size

Fig. 2.3 Position of installing hole on hanging panel for R6-15K/17K/20K/22K/25K-T2-32, R6-5K/6K/8K/10K/15K-T2-32-LV

Fig. 2.3 Position of installing hole on hanging panel for R6-15K/17K/20K/22K/25K-T2-32, R6-25K-T2-32-B, R6-40K/50K-T4-32, R6-20K-T3-32-LV,

R6-25K/30K-T4-32-LV

3、Inverter installation

15°

30 CM

50 CM

100

4- 8

100

342

551,5

295

121

135.5

100

185

100

100 100 100

4- 8

551,5

295

121

551.5

295

121

155

4- 8

135.5

4- 8

Other manuals for SAJ R6-50K-T4-32

User Manual58 pages

Questions and Answers:

G
George SmithAug 8, 2025
What to do if my SAJ R6-50K-T4-32 Inverter shows a High Temperature Error?
- I
  ivanortegaAug 8, 2025
  If your SAJ Inverter displays a High Temperature Error, first check if the radiator is blocked. Also, verify that the inverter is operating within an appropriate temperature range (not too high or too low). If both the radiator and temperature conditions are normal, it is recommended to contact your distributor or SAJ technical support for further assistance.
U
umartinAug 13, 2025
What to do if I see a Current Sensor Error on my SAJ R6-50K-T4-32?
- T
  Timothy Murillo MDAug 13, 2025
  If you frequently encounter a Current Sensor Error with your SAJ Inverter, it is recommended to contact your distributor or call SAJ technical support for assistance.

SAJ R6-50K-T4-32 Specifications

General

Rated Power	50 kW
Max. DC Input Power	75 kW
Maximum PV Input Power	75 kW
Max. DC Voltage	1100 V
Maximum PV Input Voltage	1100 V
Start-up Voltage	200 V
MPPT Voltage Range	200-1000 V
Number of MPPTs	4
Max. Input Current per MPPT	32 A
Maximum Input Current per MPPT	32 A
Rated AC Output Power	50 kW
AC Rated Output Power	50 kW
Max. AC Apparent Power	55 kVA
Rated AC Voltage	400 V
AC Output Voltage Range	310-480 V
AC Voltage Range	310-480 V
Rated Grid Frequency	50/60 Hz
AC Output Frequency	50/60 Hz
THDi	<3%
Power Factor	0.8 leading to 0.8 lagging
Max. Efficiency	98.7%
Maximum Efficiency	98.7%
DC Switch	Yes
Protection Level	IP66
Operating Temperature Range	-25°C to +60°C
Humidity Range	0-100% (non-condensing)
Communication	RS485, WiFi, Ethernet