What to do if my SAJ R6-15K-T2-32 shows a High Temperature Error?
If your SAJ Inverter displays a High Temperature Error, first check if the radiator is blocked. Also, verify that the inverter is operating within an appropriate temperature range (not too high or too low). If both the radiator and temperature conditions are normal, it is recommended to contact your distributor or SAJ technical support for further assistance.
What to do if I see a Current Sensor Error on my SAJ R6-15K-T2-32?
If you frequently encounter a Current Sensor Error with your SAJ Inverter, it is recommended to contact your distributor or call SAJ technical support for assistance.
What to do if my SAJ R6-15K-T2-32 Inverter displays a Relay Error?
If a Relay Error occurs frequently with your SAJ Inverter, please contact your distributor or call SAJ technical support.
What should I do if my SAJ R6-15K-T2-32 Inverter shows a Master Lost Communication error?
If you frequently encounter a Master Lost Communication error with your SAJ Inverter, it is recommended to contact your distributor or call SAJ technical support for assistance.
What should I do if my SAJ R6-15K-T2-32 Inverter is showing a Storer Error?
If a Storer Error occurs frequently with your SAJ Inverter, please contact your distributor or call SAJ technical support.
What to do if SAJ Inverter shows AC Voltage Error?
To address an AC Voltage Error on your SAJ Inverter, first, check the voltage of the grid and ensure the connection between the inverter and the grid is secure. Verify the on-grid standard settings of the inverter. If the grid voltage is too high, consult with local grid workers about adjusting the voltage or changing the regulated voltage value. If the grid voltage is within the allowed range and the error persists, contact your distributor or SAJ technical support.
To Next Page
General
