What to do if my SAJ R5-15K-T2 Inverter shows a GFCI Error?
To troubleshoot a GFCI Error on your SAJ inverter: * Check the insulation resistance of the positive and negative sides of the solar panel. * Ensure the inverter is not in a wet environment. * Verify the grounding of the inverter. If these checks are normal, contact your distributor or SAJ for assistance.
How to fix GFCI Error on SAJ R5-15K-T2?
To resolve a GFCI Error on your SAJ inverter: * Check the insulation resistance of both the positive and negative sides of the solar panel. * Ensure the inverter is not in a wet environment. * Verify the inverter's grounding. If these checks are normal, contact your distributor or SAJ technical support.
What causes ISO Error on SAJ R5-15K-T2 Inverter and how to solve it?
To troubleshoot an ISO Error on your SAJ inverter: * Check the insulation resistance on the positive and negative sides of the solar panel. * Make sure the inverter isn't in a damp environment. * Confirm the inverter's grounding is secure. If these checks are normal, contact your distributor or SAJ technical support for assistance.
What to check if my SAJ R5-15K-T2 displays a Grid Lost Error?
To resolve a Grid Lost Error on your SAJ Inverter, check the connection status between the AC side of the inverter and the grid. If the connection is normal, contact your distributor or SAJ technical support.
How do I troubleshoot a Frequency Error on my SAJ R5-15K-T2 Inverter?
To address a Frequency Error on your SAJ Inverter, check the country setting and the frequency of the local grid. If both are normal, contact your distributor or SAJ technical support.
What to do if my SAJ R5-15K-T2 Inverter is showing Overcurrent error?
To troubleshoot an Overcurrent error on your SAJ Inverter, check the connection between the inverter and the grid. Also, test the grid voltage for stability. If these are normal, contact your distributor or SAJ technical support.
How to fix Bus Voltage High error on SAJ R5-15K-T2 Inverter?
To troubleshoot a Bus Voltage High error on your SAJ Inverter, check the settings of the solar panel. A SAJ designer can assist you with this. If the settings are correct, contact your distributor or SAJ.
How to troubleshoot ISO Error on SAJ Inverter?
To resolve an ISO Error on your SAJ Inverter: * Check the insulation resistance of the positive and negative sides of the solar panel. * Make sure the inverter isn't in a humid environment. * Confirm that the inverter's grounding is secure. If these checks are normal, contact your distributor or SAJ for assistance.
How to fix AC Voltage Error on SAJ Inverter?
To address an AC Voltage Error on your SAJ Inverter: * Verify the grid voltage. * Confirm the connection between the inverter and the grid. * Check the on-grid standard settings of the inverter. If the grid voltage exceeds local regulations, consult with local grid authorities about adjusting the voltage at the feed point or modifying the regulated voltage value. If the voltage remains within the regulated range and the error persists, contact your distributor or SAJ directly.
What to do for PV Voltage Fault on SAJ R5-15K-T2?
To address a PV Voltage Fault on your SAJ Inverter, check the settings of the solar panel. A SAJ designer can help you. If the settings are correct, contact your distributor or SAJ technical support.
Explains DANGER, WARNING, CAUTION, and NOTICE symbols used in the manual.
Details safety precautions related to electrical shock, high voltage, and environmental conditions.
Provides technical specifications for R5-3K/4K/5K/6K-T2 inverters.
Warns about danger from fire or electricity shock and installation requirements.
Emphasizes safety for electrical connections performed by qualified technicians with protective gear.
Covers AC connection, ground protection, circuit breakers, and RCDs for safe operation.
Provides recommended specifications for DC cables and details on connecting DC connectors.
Describes the procedures for starting up and shutting down the inverter safely.
General| Max. DC Voltage | 1100 V |
|---|---|
| Number of MPPTs | 2 |
| Grid Frequency Range | 50 / 60 Hz |
| THDi | < 3% |
| DC Switch | Yes |
| Protection Class | IP65 |
| Rated AC Power | 15000W |
| Max. AC Power | 16500W |
| Rated AC Voltage | 230V |
| Operating Temperature Range | -25 ~ +60 °C |
| Communication | Wi-Fi |
To Next Page
