How to resolve Over Bus Voltage error on SAJ R5-15K-T2?
To troubleshoot an Over Bus Voltage error on your SAJ Inverter, verify the settings of the solar panel. A SAJ designer can assist you with this. If the settings are correct, contact your distributor or SAJ technical support.
What causes High Temperature Error on SAJ R5-15K-T2?
To troubleshoot a High Temperature Error on your SAJ Inverter, check if the radiator is blocked and ensure the inverter is operating within an appropriate temperature range. If these are normal, contact your distributor or SAJ technical support.
How to fix Null line-to-earth voltage fault on SAJ R5-15K-T2?
To address a Null line-to-earth voltage fault on your SAJ Inverter, check if the connection of the AC output grounding terminal is stable and reliable. If it is normal, contact your distributor or SAJ technical support.
What to do if my SAJ R5-15K-T2 Inverter is showing Overcurrent error?
To troubleshoot an Overcurrent error on your SAJ Inverter, check the connection between the inverter and the grid. Also, test the grid voltage for stability. If these are normal, contact your distributor or SAJ technical support.
How do I troubleshoot a Frequency Error on my SAJ R5-15K-T2 Inverter?
To address a Frequency Error on your SAJ Inverter, check the country setting and the frequency of the local grid. If both are normal, contact your distributor or SAJ technical support.
What to check if my SAJ R5-15K-T2 displays a Grid Lost Error?
To resolve a Grid Lost Error on your SAJ Inverter, check the connection status between the AC side of the inverter and the grid. If the connection is normal, contact your distributor or SAJ technical support.
What causes ISO Error on SAJ R5-15K-T2 Inverter and how to solve it?
To troubleshoot an ISO Error on your SAJ inverter: * Check the insulation resistance on the positive and negative sides of the solar panel. * Make sure the inverter isn't in a damp environment. * Confirm the inverter's grounding is secure. If these checks are normal, contact your distributor or SAJ technical support for assistance.
How to fix GFCI Error on SAJ R5-15K-T2?
To resolve a GFCI Error on your SAJ inverter: * Check the insulation resistance of both the positive and negative sides of the solar panel. * Ensure the inverter is not in a wet environment. * Verify the inverter's grounding. If these checks are normal, contact your distributor or SAJ technical support.
General| Max. DC Voltage | 1100 V |
|---|---|
| Number of MPPTs | 2 |
| Grid Frequency Range | 50 / 60 Hz |
| THDi | < 3% |
| DC Switch | Yes |
| Protection Class | IP65 |
| Rated AC Power | 15000W |
| Max. AC Power | 16500W |
| Rated AC Voltage | 230V |
| Operating Temperature Range | -25 ~ +60 °C |
| Communication | Wi-Fi |
Explains DANGER, WARNING, CAUTION, and NOTICE symbols used in the manual.
Details safety precautions related to electrical shock, high voltage, and environmental conditions.
Provides technical specifications for R5-3K/4K/5K/6K-T2 inverters.
Warns about danger from fire or electricity shock and installation requirements.
Emphasizes safety for electrical connections performed by qualified technicians with protective gear.
Covers AC connection, ground protection, circuit breakers, and RCDs for safe operation.
Provides recommended specifications for DC cables and details on connecting DC connectors.
Describes the procedures for starting up and shutting down the inverter safely.
To Next Page
