Salicru SLC TWIN series User Manual

SLC TWIN
INDEX
USER’S MANUAL FROM 0.7 kVA TO 3 kVA ....... Page 2
USER’S MANUAL FROM 4 kVA TO 20 kVA ........ Page 34

Salicru SLC TWIN series Specifications

General

Power factor	0.9
Transfer time	0 ms
Frequency	50/60 Hz
Battery type	Sealed lead-acid
Communication ports	RS232, USB
Optional communication	SNMP
Output waveform	Sinusoidal
Operating temperature	0 °C to +40 °C
Relative humidity	0 - 95% (non-condensing)
Protection	Overload, short circuit
Technology	On-line double conversion
Input voltage	Single phase

Summary

1. INTRODUCTION.

1.2. USING THIS MANUAL.

Guidance on manual usage, symbols, and obtaining further assistance.

2. QUALITY AND STANDARD GUARANTEING.

2.3. SAFETY AND FIRST AID.

Crucial safety instructions and first aid information for safe operation.

3. PRESENTATION.

3.1.1 Views and legends.

3.1.2. Rear, description and connectivity.

Detailed diagrams and descriptions of the rear panel connections for various models.

3.1.4. Control panel.

Explanation of the UPS control panel functions and LCD display messages.

3.2. DEFINITION AND STRUCTURE.

3.2.2. Structural diagram.

3.3. SYSTEM DESCRIPTION.

3.3.1. Operating principle.

Explanation of the double conversion AC/DC-DC/AC operating principle of the UPS.

3.4. OPTIONAL.

3.4.1. Integration into IT networks through the SNMP adaptor (C16).

4. INSTALLATION.

4.1. IMPORTANT SAFETY INSTRUCTIONS..

Essential safety guidelines to follow before installing and starting up the equipment.

4.1.2. Localiton.

4.1.3. Take care of your safety.

Critical safety precautions related to handling and operating the UPS equipment.

4.1.4. Operating.

4.1.5. Maintenance, service and faults.

4.4. CONNECTION OF THE INPUT, OUTPUT AND PROTECTIVE EARTH WIRING.

4.4.1. Notes for installing.

4.4.2. Installation.

4.4.3. Procedure to connect the models with external batteries, extended autonomies.

4.5. COMMUNICATION PORTS..

4.5.1. RS-232 interface (C7).

4.5.2. AS400 interface (C16) (Option).

4.7. SOFTWARE.

Free software - WinPower.

5. OPERATION.

5.1. OPERATING MODE.

Explanation of the different operating modes of the UPS, including Line, Battery, and Bypass.

5.1.1. Starting up the UPS with mains voltage (on Line mode).

Step-by-step guide for starting up the UPS when mains voltage is available.

5.1.2. Starting up the UPS without mains voltage (on Battery mode).

Procedure for starting up the UPS using battery power when mains voltage is absent.

5.1.3. UPS shutdown with mains voltage (on Inverter mode).

How to safely shut down the UPS inverter when operating with mains voltage.

5.1.4. UPS shutdown without mains voltage (on Battery mode).

Procedure for shutting down the UPS when it is running on battery power.

5.1.5. Battery test function.

5.2. CONTROL PANEL.

Understanding the UPS control panel, LCD messages, and operating codes.

5.2.1. No output mode, code «00».

5.2.2. Bypass mode, code «01».

5.2.3. Line mode.

5.2.4. Battery mode / Battery test mode.

5.2.5. Fault mode.

5.2.6. Settings through the LCD panel.

6. MAINTENANCE, WARRANTY AND SERVICE.

6.1. BATTERY MAINTENANCE.

6.2. NOTES FOR INSTALLING AND REPLACING THE BATTERY.

6.3. TROUBLESHOOTING GUIDE.

A guide to identifying and resolving common UPS problems and fault codes.

6.4. WARRANTY CONDITIONS.

6.4.2. Warranty terms.

7. ANNEXES.

7.1. GENERAL TECHNICAL SPECIFICATIONS.

7.2. PARTICULAR TECHNICAL SPECIFICATIONS