Need help?Do you have a question about the Salicru SPS 750 ADV R and is the answer not in the manual?
Expresses gratitude for purchasing the product and encourages reading the manual.
Explains how to use the manual and where to find safety instructions.
Refers to symbols used on the equipment and in the manual for safety.
Outlines the company's commitment to quality and environmental policy.
Lists standards the UPS is designed and manufactured according to.
Details product design for environmental respect and ISO 14001 compliance.
Presents views of the device, referring to figures and nameplate information.
Shows front and rear views of the SPS ADVANCE R model.
Displays front views of SPS ADVANCE T devices and battery modules.
Illustrates rear views of standard and B1 devices based on power rating.
Explains the model nomenclature for SPS ADVANCE T and battery modules.
Shows a block diagram illustrating the UPS operating principle.
Lists key features and capabilities of the SPS ADVANCE R and T models.
Describes the function and placement of an optional isolation transformer.
Details the slot for communication cards and their purpose.
Explains how to integrate the UPS into networks using an SNMP adapter.
Mentions optional guide kits for rack mounting SPS ADVANCE R models.
Instructs on how to receive, unpack, and check the UPS.
Details the process of checking received items, handling damage, and contents.
Provides guidelines for storing the UPS and battery units properly.
Advises on the best methods for transporting the UPS to its installation location.
Covers considerations for placing and securing the UPS units.
Explains the procedure for mounting SPS ADVANCE R models in a 19" rack cabinet.
Lists checks and considerations before connecting the UPS to power.
Discusses battery installation, protections, and safety precautions.
Details how to connect the UPS input power cable and socket grounding.
Explains how to connect loads to the UPS's output IEC connectors.
Covers connection of output terminals for specific SPS ADVANCE T models.
Provides instructions for connecting optional battery modules for backup extension.
Describes the EPO terminals for an external emergency power off button.
Explains the communication ports (RS232, USB) for monitoring and control.
Details the RS232 and USB ports, their uses, and limitations.
Describes how to install an electronic communication unit (e.g., SNMP) in the smart slot.
Explains how to download and use the management and monitoring software.
Provides important advice before starting up the UPS with loads connected.
Details the initial startup procedures for the UPS.
Lists essential checks to perform before starting the UPS.
Explains how to start up and shut down the UPS under various conditions.
Describes the process of starting the UPS when mains voltage is present.
Explains how to start the UPS using battery power when mains voltage is absent.
Details the procedure for shutting down the UPS with mains voltage available.
Outlines the steps for shutting down the UPS when mains voltage is absent.
Describes the components of the control panel, including buttons and display.
Provides general information about the UPS display and its readouts.
Explains the meaning of various symbols and data shown on the LCD display.
Lists audible alarms, their modulation, and muting possibilities.
Provides a list of warning and error/fault codes with their descriptions.
Details maintenance requirements for UPS batteries and their service life.
Gives specific notes and safety warnings for battery installation and replacement.
Offers a guide to diagnose and resolve common UPS problems.
Explains the terms and conditions of the product warranty.
Provides details on the warranty terms and registration.
Lists conditions under which the warranty will not be valid.
Informs where to find information about technical service and support centers.
Presents detailed technical specifications for ADVANCE R models.
Lists detailed technical specifications for ADVANCE R models.
Provides detailed technical specifications for ADVANCE T models.
Defines technical terms and acronyms used in the manual.
To Next Page
General
