Need help?Do you have a question about the Salicru SPS One Series and is the answer not in the manual?
General| Topology | Line-interactive |
|---|---|
| Battery Recharge Time | 4-6 hours to 90% |
| Operating Temperature | 0 - 40 °C |
| Storage Temperature | -15 - 45 °C |
| Humidity | 0-95% non-condensing |
| Output Voltage | 230 VAC |
| Output Frequency | 50/60 Hz |
| Battery Type | Sealed lead-acid (maintenance-free) |
| Communication Ports | USB |
| Typical Backup Time at Full Load | 3 min |
| Number of Output IEC Jumpers | 4 |
| Transfer Time | <6 ms |
| Protection | Overload, short circuit, discharge, overcharge |
| Noise Level | <40 dB |
| Typical Backup Time at Half Load | 5-15 minutes (depending on model) |
Describes the UPS technology, AVR function, and its role in supplying power during outages.
Highlights key features of the SPS.ONE, including line-interactive technology, USB interface, and cold start capability.
Details initial connection procedures and recommends a minimum 4-hour battery charge before first use.
Instructs on connecting external devices to UPS output sockets and warns against using laser printers.
Describes the steps to start the UPS, including the internal test and output voltage supply.
To Next Page
