Need help?Do you have a question about the Salicru SLC TWIN PRO Series and is the answer not in the manual?
General| Frequency | 50 / 60 Hz |
|---|---|
| Display | LCD |
| Power Factor | 0.9 |
| Transfer Time | 0 ms |
| Humidity | 0-95% non-condensing |
| Output Voltage | 220/230/240 VAC |
| Battery Type | Sealed Lead Acid |
| Communication Ports | RS-232, USB |
| Input Voltage | 160-276 VAC (single phase), 320-480 VAC (three phase) |
| Output Frequency | 50/60 Hz |
| Waveform | Sinusoidal |
| Protections | Overload, Short Circuit, Overvoltage, Undervoltage |
| Operating Temperature | 0 °C to +40 °C |
| Storage Temperature | -15°C to 50°C |
| Cooling | Fan |
| Certifications | EN 62040-1, EN 62040-2 |
| Topology | Double Conversion Online |
Thanks user for purchase and provides manual guidance.
Explains manual usage, defines terms, and symbols.
Outlines company's commitment to quality and environmental management.
Details product manufacturing standards and directives.
Discusses product environmental design and recycling aspects.
Shows illustrations of the equipment based on case format and power.
Explains the product nomenclature and model coding system.
Details the double conversion principle and operational aspects of the UPS.
Lists and describes optional features available for the UPS.
Lists important points to consider before and during installation.
Details procedures for receiving, unpacking, and inspecting the equipment.
Provides guidelines for storing the UPS and battery packs safely.
Details the process of unpacking the UPS equipment from its packaging.
Explains how to safely transport the UPS to its final installation location.
Guides on connecting the input power to the UPS, including safety precautions.
Details connecting the separate static bypass line for specific models.
Instructs on connecting the output power block to feed the connected loads.
Provides instructions for connecting external batteries for extended backup.
Explains the correct connection of earth terminals for safety.
Details the connection and function of the Emergency Power Off (EPO) terminals.
Guides on connecting multiple UPS units in parallel for redundancy or capacity.
Describes various communication ports and interfaces available on the UPS.
Provides information on downloading and installing the WinPower monitoring software.
Lists important considerations before powering up the UPS and connected loads.
Guides on the initial setup and checks before commissioning the UPS.
Explains the procedures for starting up and shutting down the UPS.
Details the operating procedures for a UPS system configured in parallel.
Step-by-step guide for adding a new UPS to an existing parallel system.
Procedure for replacing a malfunctioning UPS unit in a parallel system.
Describes the fundamental operating principle of the manual bypass switch.
Details the process of transferring the UPS to maintenance bypass mode.
Explains how to return the UPS from maintenance bypass to normal operating mode.
Overview of the control panel components: buttons, LCD, and indicators.
Details the information displayed on the UPS main screen.
Explains how to navigate and interpret information on the UPS LCD panel.
Introduces special functions that cater to specific user applications.
Provides guidance on battery maintenance, replacement, and safety.
Offers a guide to troubleshoot common UPS problems and indications.
Outlines the terms and conditions of the product warranty.
Provides information about the available technical service and support network.
Presents detailed technical specifications for the UPS models.
Defines key technical terms and acronyms used in the manual.
To Next Page
