EasyManua.ls Logo

salling 10754796 - Troubleshooting; Technical Data

salling 10754796
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
TECHNICAL DATA
Article No. 10754796
220-240V~, 50/60Hz
240 Watt
Protection against electric shock: I
Climate Type: N/SN/ST/T
PRODUCER
Epiq ApS
Krøyer Kielbergs Vej 3, 3. th
8660 Skanderborg, Denmark
www.epiq.dk
We cannot be held responsible for any printing
errors.
pour water on cord, plug and ventilation, immerse the appliance in water or any other
liquid
5. Allow drying thoroughly with a dry cloth, then return the component to the home
position.
TROUBLESHOOTING
No.
1
2
3
4
5
Error
The display
screen shows
”OPEN
Leakage of
loading barrel or
discharge faucet
Mixing blade emit
noise
Display E1\2
Display E3
Poor contact between the
loading barrel component
and the micro switch.
Missing or damaged
sealing ring, loading barrel
not in place.
Using ingredients with low
sugar content can cause
the evaporator to freeze or
setting the temperature too
low can cause the frosting
to become too hard.
Temperature sensor short
circuit/open circuit
Mixing motor stuck
Check if the protrusions on the
loading barrel assembly have
poor contact with the micro
switch. If there is any damage,
the product must be returned for
repair at the place of purchase.
Check for missing components
and whether they have been
rotated. If there is any damage,
the product must be returned for
repair at the place of purchase.
Replace with ingredients with
higher sugar content or adjust
the set temperature.
The product must be returned for
repair at the place of purchase.
The product must be returned for
repair at the place of purchase.
Error description Solution

Related product manuals