PRO
2
check
®
Ultrasonic Oxygen Indicator
UNIT SPECIFICATIONS
General Specifications
Physical Data
Dimensions: 3.60" W x 5.75" H x 1.29" D
(9.14 cm W x 14.6 cm H x 3.28 cm D)
Weight: 9 ounces (255.15 Grams)
Connector: ¼" anodized aluminum hose barb
Case: Solid color ABS plastic with threaded metal bolt channels
Battery: The battery capacity is a standard 9-volt "transistor" alkaline
type battery with polarized terminals.
A rechargeable type battery is not recommended.
Operating Temperature: 32º F to 105º F (0º C to 41º C)
Storage Temperature: -29º F to 160º F (-34º C to 71º C)
Specifications - Concentration Mode
Measured Oxygen Concentration Range: 20.9% to 100%
Response Time: 10 seconds
Accuracy
: ± 2%, assuming proper calibration with a sample gas at a
temperature of 32º F to 105º F (0º C to 41º C), and a flow rate of 2 to 5 LPM
to the unit during calibration.
Input Gas Flow Rate: Use a flow rate of .5 to 10 LPM for concentrator
sampling.
Sampling Frequency: Continuous
Vents: The unit vents through the side vent
port.
Linearity: ± 2% of Full Scale
Sensor: Ultrasonic
10
To Next Page
Loading...