7
8) ‘1-12’ will flash, then your height and gender will be displayed.
Wait for ‘0.0’ to be displayed, then allow the scale to switch off. The memory is then set.
Position the scale on a flat level surface.
1) Press the ON/OFF button to turn the scale on.
2) ‘HI’ will be displayed followed by ‘1-12’.
3) Whilst ‘1-12’ is flashing, press ON/OFF button to
enter weight reading only mode.
4) Zero is displayed.
5) Whilst zero is displayed, step onto the platform
and stand still.
6) After a few seconds your weight is displayed.
WEIGHT READING ONLY
Child Mode
9) Repeat procedure for a second user, or to change user details.
Note:To update or overwrite the memorised data, follow the same procedure, making changes as required.
Tip: During the set-up procedure press on/off to quit and start again at any time.
GB
To Next Page
Loading...
