OWNER’S MANUAL V.052021 ENGLISH
M-065 INDOOR BIKE K5
This manual can be downloaded on www.salter.es
Function Specification
Auto ON/OFF
The monitor will automatically be started working once the user starts to do exercise on the machine. It will
be automatically turned off after the machine is not used for 1 minute.
LEVEL
The score automatically detects the level and display it on the screen. The range is 1-32.
TIME
1. Under Free-ride mode, TIME will be automatically counted up as range 00:00:00~99:59:59
2. Setting value range of Count Down is 00:05:00~99:59:00. The monitor will beep when count down to 0.
SPEED
SPEED display range is 0.0 ~ 999.9 km/h
RPM
RPM display range is 15 ~ 999.
DISTANCE
1. Under Free-ride mode, distance will be automatically counted up as range 0.0~999.9 km or mile
2. Setting value range of Count Down is 1.0~999.0 km/mile. The monitor will beep when count down to 0.
CALORIE
Calorie will be automatically counted up as range 0.0~9999 kcal.
PULSE
Pulse display range is 40～240. The Pulse value will display “P” after user stops measuring heart rate for 8
seconds.
COLORFUL LIGHTS INDICATION
5 different lights color will appear depending on the exercise intensity(watts).The following is the
relationship between different light color and exercise intensity (watts).
Exercise intensity. (Stop) Light Heavy
Colour of light None Green Cyan Blue Purple Red
Watts 0 0-75W 76-125W 126-175W 176-225W 226 & more
HEART RATE / LIGHT BLINKING ALERT
The blinking lights illustrate the appropriateness for different age of riders with different maximum heart
beat. Low light blinking (twice per second) means users exercise is close to high intensity, high light
blinking (four times per second) means user is in high exercise intensity process. No blinking lights mean
user is in low or normal intensity exercise process.
Age setting：
Press ENTER/RESET key three times during stop mode, the AGE number will be blinking then press UP or
DOWN key to set age. Press ENTER key to confirm the age setting.
After age setting, monitor will calculate and set suitable Light-blinking threshold automatically.
To Next Page
Loading...