Salter TE-250 - Replacing the Battery; Product Identification

4 | GB
GB | 5
Replacing the Battery
1. Gently slide the battery cover back.
2. Carefully remove the old batteries and
properly discard.
3. Insert new batteries (Two 1.5V alkaline
AAA Size) according to the proper polarity.
4. Slide the battery cover back on.
Note
• It is recommended to remove the batteries
if the unit will not be used for an extended
period of time.
• Please store batteries away from small children and heat.
• Do not use rechargeable batteries.
• Dispose of used batteries in accordance with the applicable legal regulations.
• Never dispose of batteries in the normal household waste.
Scan in progress
PRODUCT IDENTIFICATION
Memory
Recall
button
Battery
compartment
lid
LCD display
Power /
scan & measure
Button
Human/Object
Button
Red LED Light
for Fever Alarm
(Only in Human
Mode)
Measurement sensor
Buzzer